CBD vape pens are being utilized by people everywhere for a wide variety of reasons. Because of this, many people are curious about how to make CBD vape juice. If you are a lover of CBD vape, you’ve come to the right place to learn how to make CBD vape liquid. CBD vape juice, commonly known as CBD e-liquid, is a liquid from cannabidiol (CBD) extract created for vaporizers and e-cigarettes.

It is a natural chemical present in the cannabis plant and also has potential health benefits. In addition to saving money and having complete control over the components, making your own CBD vape juice allows you to personalize it and enjoy the benefits of potency.

In this article, you will learn about cannabidiol (CBD) and its uses, acquire the tools you need to create your own vape juice, and find out how much CBD you need. Whether you’re new to cannabidiol (CBD) or just want to try your hand at a DIY project, we’ll show you how to make your own unique CBD vape. 

Ingredients and Equipment Needed for CBD Vape Juice

ingredients and equipment needed for cbd vape juice

Making your own CBD vape juice requires specific ingredients and equipment. 

Understanding the role of each component and using precise tools for measurement is really important to make sure everything is safe and effective.

 Here’s what you’ll need:

  1. CBD Isolate

Pure, crystalline powder that contains 99% pure CBD. It’s the key ingredient in your vape juice. To stay away from impurities, use only high-quality, lab-tested CBD isolate.

  1. Vegetable Glycerin (VG)

A thick, sugary fluid. The vape juice becomes more viscous, resulting in thicker clouds of vapour. VG lessens the soreness in the throat as well.

The PG/VG ratio can be adjusted based on preference. Two typical ratios for PG/VG are 50/50 and 60/40.

  1. Propylene Glycol (PG)

This thin, odorless liquid is commonly used as a base in vape juices. PG facilitates the dissolution of the CBD isolate, makes vaping more comfortable, and serves as a carrier for the CBD. Never use anything other than food-grade PG.

  1. Flavorings/Terpenes (Optional)

Concentrated flavors or terpenes can be added. Provides flavor to the vape juice.

Terpenes can also add therapeutic benefits. Only use flavorings that are safe for inhalation. Avoid oil-based flavors, as they can be harmful when vaped.


  1. Digital Scale
  2. Syringes
  3. Glass Mixing Container
  4. Stirrer or Magnetic Stirrer
  5. Empty Vape Juice Containers
  6. Gloves

Step-by-Step Guide to Making CBD Vape Juice

step by step guide to making cbd vape juice

Step 1 Preparation

  • Clean Workspace Begin with a clean, clutter-free workspace. Ensure all surfaces are sanitized.
  • Safety Gear Put on gloves and safety goggles to protect against spills or splashes.
  • Organize Materials Have all your ingredients and equipment within easy reach.

Step 2 Calculating Concentrations

  • Determine Desired Strength Decide the concentration of CBD in your vape juice. For example, for a 30ml bottle, you might want 1000 mg of CBD.
  • Precise Measurements Use the digital scale to measure the CBD isolate accurately. Accuracy is crucial for the dosage.

Step 3 Mixing the Ingredients

  • Dissolving CBD in PG

Measure the desired amount of Propylene Glycol (PG) using a syringe. Transfer it to the glass mixing container.

  •  Add the CBD isolate to the PG

Heat the mixture slightly by placing the container in a warm water bath. This helps the CBD dissolve more effectively. Stir continuously until the CBD isolate is completely dissolved in the PG. This may take several minutes.

  • Adding Vegetable Glycerin (VG)

Once the CBD is fully dissolved, add the Vegetable Glycerin to the mixture. The amount of VG will depend on your desired PG/VG ratio. A 50/50 or 60/40 ratio is common.

  • Adding Flavorings (Optional)

If you’re using flavourings or terpenes, add them now.

Start with a small amount, as they can be quite potent.

  • Final Mixing

Stir the mixture thoroughly for a few minutes to ensure all components are evenly distributed. If available, use a magnetic stirrer for more efficient mixing.

Step 4 Quality and Consistency Checks

  • Viscosity Check Ensure the liquid is not too thick or thin for your vaping device.
  • Taste Test Optionally, conduct a small taste test to check flavour balance (be cautious with this step).
  • Consistency The liquid should be homogenous with no visible separation.

Step 5 Transferring to Vape Juice Container

  • Using a Syringe Carefully transfer the final product into a clean, empty vape juice container using a syringe.
  • Avoiding Contamination Ensure no contaminants enter the juice during transfer.

Step 6 Steeping (Optional)

  • Steeping Process Some users prefer to let the vape juice steep for a few days to allow flavours to blend. Store in a cool, dark place.
  • Shaking Shake the container once a day during the steeping process.

Step 7 Storage

  • Proper Storage Store your CBD vape juice in a cool, dark place to preserve its quality.
  • Labelling Label the container with the date of production and concentration for future reference.

How to Store and Use CBD E-Juice

how to store and use cbd e juice

Make sure to store your CBD vape juice correctly to keep it fresh and potent now that you’ve mastered the art of making it. To maintain the integrity of the CBD and flavorings, it is crucial to store vape juice in a cool, dark, and protected area, away from heat and direct sunlight. Putting it in an airtight container also makes it last longer without losing quality. Here are the simplest rules to follow when using vape juice. 

To maintain optimal flavor and performance, clean your vape device frequently and use new coils. Start with a low dose and gradually raise to reach your optimal level for beginners. Always keep in mind that finding your optimal solution will require patience. Homemade CBD vape juice can be enjoyed to the best with the right storage and usage.

Tips & Techniques

  • Start with a low dose of CBD and gradually increase it until you find your ideal dosage.
  • Inhale gently and slowly, allowing the CBD vapour to be absorbed effectively.
  • Clean and maintain your vaping device regularly to ensure optimal performance and flavour delivery.


Making your own CBD vape juice is a rewarding process that allows you to customize your vaping experience while saving money. By following the steps outlined, you can create a high-quality product tailored to your preferences. Remember to measure your ingredients carefully, maintain a clean workspace, and store your vape juice properly. Experiment with different PG/VG ratios and flavorings to find the perfect blend for you. With patience and practice, you’ll enjoy the benefits of personalized CBD vape juice.

How To Refill A Geek Bar?